New releases from Arai - everything from exciting new graphics to brand new colors for all you motorcycle helmet lovers out there!
One of our favorite new releases from Arai is the Arai Profile Graphic - Riptide. The Riptide is available Silver, Red, Blue and “Lady“.
Arai Profile Riptide - Silver
The Arai Profile Riptide Graphic includes the following features:
Long Oval Fit
Brow Vent Faceshield Ventilation System provides cooling air in upper face area without holes in critical forehead area of the shell or in the impact-absorbing liner material
Optically-correct pre-formed faceshields-better vision, UV ray protection with less distortion
De-Mist Lock faceshield tab pushes forward to open the shield slightly-help clear fogging
Removable Breathguard-reduce fogging by deflecting breath away from faceshield
CLC (Complex Laminate Construction) shell-fiberglass composite is stronger and lighter allows use of softer, less-dense liner materials inside for increased rider comfort
FFS (Free Flow System-reduces wind turbulence while increasing the exhaust of hot air from the facial area
Dual Intake / Dual Exhaust Ventilation-dual TDF-2 top intake vents and DDL-3 bridged exhaust vents designed to draw significant volume of air from helmet interior
Multiple-Foam Interiors for comfort
Rear Exhaust Channel and Vent adds a racy look while drawing hot air from helmet interior
Fully removable liner and cheek pads
New enhanced pull down chin spoiler, increases exhaust of hot breath to minimize shield fogging
Meets or exceeds Snell and D.O.T. standards
Check out all the other great Arai Profile graphics available at Helmet City. Or if you want to see more models available by Arai click here!
Or if you’re in the market for a new Off-Road helmet check out Arai’s XD-3 line of graphic and solid helmets. Brand new to Arai’s XD-3 line is the Luster Orange graphic pictured below.
Arai XD-3 Luster - Orange
The Arai XD-3 Luster includes the following features:
XD means “Crossover Design” because it crosses over into so many riding styles. You can quickly and easily change it for adventure touring, dual-sport, Supermoto competition, commuting, whatever. Visually, it looks like a dirt helmet, with its peak, protruding chin bar and the opening for goggles. But the XD Series also has a full faceshield like a street helmet, a faceshield that easily slides up under the peak. And you can remove the shield and/or the peak in no time, and then easily re-install either or both whenever you like. The XD Series. Uniquely functional. Uniquely Arai. And now, when others are introducing their first XD “copies,” Arai is already taking you to the next level with the brand new XD3.
High-flow peak channels air directly into the front vents
Twin-cam Shield Pivot System allows the face shield to operate fully under a peak that can be lowered for better aerodynamics. Can be configured with shield and peak, peal only (for use with goggles) or shield only
Fully Removable/Replaceable and washable liner with optional sizes available for custom fit
4 top vents. Dual Intake/Dual Exhaust Ventilation-dual I/C top intake vents and Double Delta bridged exhaust bents designed to draw significant volumes of air from helmet interior
CLC (Complex Laminate Construction) shell-fiberglass composite is stronger and lighter-allows use of softer, less-dense liner materials inside for increased rider comfort
Efficient chinbar vent (with Interior and exterior controls) flows fresh air to the mouth area or across the shield interior to help prevent fogging
Large chinbar side exhaust vents draw out additional hot air
Meets or exceeds Snell and DOT standards
The peak/visor supplied is not suitable for high-speed use where air striking a side or main surface of the peak may cause difficulty in returning the head to a forward and/or level position
Looking for more off-road or Motorcross helmet options? Helmet City has plenty of variety to help you find your perfect off-road helmet. Click here to see our collection of off-road motorcycle helmets.
Another great model from Arai is their line of Vector helmets. Recently added to the Vector line are the Scream, Haga and the Samurai graphic (pictured below).
Arai Vector Samurai - White
The Arai Vector Samurai includes the following features:
Relaxed round-oval fit
“Delta-3″ top center intake scoop, scavenges more air to help improve airflow even further turbulence over the shield and onto the shell
Chin vent design, with dual-pivot hinge mechanism, allows for a more easily operable single span vent gate with an increase airflow capacity
Enhanced organic shell shape, bottom trim and (non-removable) neck roll which curve in at the bottom to give a more natural appearance, which also helps minimize wind turbulence
Rubber breathguard, designed to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from inside surface of the shield
Shell mold features to strengthen the shell, enhance airflow and overall appearance
Type-8 diffuser design with redesigned and improved intake and exhaust ports to both improve airflow and reduce wind turbulence
Removable liner / Cheek pads
SAJ side pods have a lower profile and are much more flush with the shell of the helmet to provide a much cleaner look
Meets or exceeds Snell and DOT Standards
Check out all the great Arai helmets available at Helmet City today! We have several new graphics and solids available from Arai - Hurry these great helmets won’t last long!
Reader Comments
The article is ver good. Write please more
I think its a great work & it certainly will make many realise that how precious their love is.
blog.helmetcity.com - cool!!!!
I rarely comment on blogs but yours I had to stop and say Great Blog!!
I’m glad that after surfing the web for uch a long time I have found out this information. I’m really lucky.
Amazing news, thank you!
@Laura many thanks. Afraid I don ‘t have time to sign up though it sounds interesting
Ya put a smile in my face.
Thank you much for that great blog post.
nice job men:)
Great site. Keep doing
It is the coolest site, keep so
Awesome!
Thx
Right be employed! Gratefulness you exceptionally much! I again wanted to write in my blog something like that. Can I away interest of your fill someone in on to my blog? Of line, I will join backlink?
Good to see you’re doing some research to fill in the ???
I once in a blue moon say discuss on blogs but yours I had to stop and approximately Matchless Blog!!
blog.helmetcity.com - go to my favorites!!!
Thanks for writing, I very much liked your newest post. I think you should post more frequently, you evidently have natural ability for blogging!