Helmetselfie Highlight: Scorpion Helmet in Action

Sarita

George Ferreira was the first only one to submit a helmetselfie in the the short amount of time after we announced this week’s #helmetselfie project on Google+. We know it takes some time to get those action shots with helmet on and bike revving and we will hope that more pics roll in for next week’s blog highlight.

In the meantime, we want to take a minute to thank George for all his amazing contributions. His gorgeous pictures of his Scorpion helmet are so dramatic with the reflection in the iridium shield . We have come to admire his photogenic helmet (and his skill in taking awesome selfie pictures on his bike). The scenery always looks spectacular and his composition is mototastic.

 

George has shared pictures with us from rides that cover lots of miles and lots of road. This picture was near Mono Lake in CA, but George has ridden on both coasts and many places in between.

 

So THANK YOU George for all the colorful contributions. We dedicate this week’s “Helmetselfie Highlight” to you!

Ride and safe and keep those amazing pictures coming!


 

 

New Shoei RF-1200 Released Today!

With a thinned down design, a lighter and more compact shell and amazingly increased performance, the new Shoei RF-1200 may sounds like an iPhone 5. But this helmet’s technology is more than smart, it’s a completely brilliant redesign. The Shoei RF-1200 carries with it all the knowledge Shoei has built up over the years.

Shoei is calling the RF-1200 the “next generation of technology.” The first update to the model since 2009, Shoei has completely redesigned the RF 1200 with a focus on aerodynamics, shell structure and the EPS liner.

The shell has a completely new shape and size that is lighter than the RF-1100 (3.46lbs for the RF-1200 compared to the RF-1100 at 3.54lbs.) This makes the RF-1200 Shoei’s lightest full face helmet with Snell approval. (The GT-Air is lighter and includes an internal sunshield, but is not Snell certified.)

The shell has a more compact, aggressive, streamlined design. The unique contoured lines along the bottom of the shell are not just elegant, they’re functional. The Shoei RF-1200 is designed to accommodate an Alpinestars neck brace.

The shell itself is a Multi-Ply Matrix AIM+ shell that is hand laid with six layers of organic fibers, making it incredibly tough and light.

The Dual layer EPS has varying density in the foam in key areas and work in conjunction with 14 total vent points. The Shoei RF-1200 will be quieter than its predecessor and will vent better. (Get ready for a new level of riding comfort!)

There will be four shell sizes and all the cheek pads will be interchangeable. This will make it possible to get the ultimate custom fit in the RF1200. The liner is completely removable and washable, of course, and has a new, improved 3D Max liner that will wick moisture twice as fast. (Get ready to ride dry!)

The Shoei RF 1200 will have a new improved base plate system called the QR-E that will allow you to change the shield faster than ever before. The spring mechanism is stronger and the detents are no longer on the shield, they are now part of the base plate system. The new 5 stage dial rotates so you can get the proper seal and  better fit on the gasket.

The RF-1200 comes with a Max Vision Pinlock Anti-Fog shield that boasts zero distortion! The shield technology on the CRW-1 shield (unique to the RF-1200) was first seen on the Neotec and then the GT-Air. The tab on the left makes for easy one-handed operation. This simpler, more stream-lined locking shield system has “ribs” on the top and bottom edge to make the shield strong and resistant to bending from pressure.

With so many improvements to what has already been a strong seller for Shoei, the RF-1200 is truly a revolution in helmet technology. We think you’ll be more impressed than you were with your friend’s iPhone 5. And no phone, no matter how smart, can help you experience the freedom of the open road like a revolutionary new lid. So hang up and hit the road in the new Shoei RF-1200!

Answers and Updates

By Gerde Applethwaite

Shorter: A collection of updated information to recent posts and answers to questions from readers.

1) Joe Rocket Survivor Suit

I am surprised by the number of questions about the Joe Rocket Survivor Suit. They seem to be coming from both touring riders and commuters alike. No, I haven’t really done a water/leak test as yet. Summer will be over all too soon and I will get that drenching test done then. I like this suit more than I thought I would. Its actually really easy to get in an out of once you get the routine down. I had thought that because its a suit I would wear it less often than my jacket and overpants combo, but no. The Survivor suit has been subjected to temps in the mid-eighties and even though it is black for the most part I am well ventilated with all of the flaps and the “Big Air Vent.” I have been wearing it much of the time with the thermal liner out but have on a few occasions worn it in the evening with the liner in. Its plenty warm.

The reflective panels seem adequate to give you decent visibility in traffic although I haven’t changed my mind about wanting more. I am just a big hi-viz freak.

2) Firstgear Kilimanjaro Jacket

I have done some rudimentary field tests on the visibility of this jacket in traffic. It involves friends loitering on a corner in a busy part of town and then waiting to see how long it takes to catch sight of the jacket as I come toward them on the busy road in both day and night tests. It is as you suspect. The jacket is a real winner in the vision tests. The only downside is that the black reflective tape is nowhere near as bright as the silver tape you see on so many other jackets. I would like to see Firstgear move to a higher visibility reflective tape in the future.

Ventilation is good and I haven’t had any trouble on warm days with the vent zippers open. On warm days, of course,  I just zip out the thermal liner. The jacket seems a bit bulky (its a full ¾ length touring jacket) until you are up and riding and then you really don’t notice it.

3) Pinlock Shield setup for my Arai RX-Q helmet

Yup, I still like my Pinlock setup and I do wind up changing them out on long day rides. Recently, I have done a few rides up and over Mt. Tamalpais of late and I started out with the light grey replacement visor on but when I got to Marin the weather was foggy. I stopped and swapped in the yellow visor and it changed the whole ride. Online you will find folks who pop Arai SAI shields in and out like buttah but it is still a bit of a cumbersome project for me. I am getting better at it though – practice.

Now that I have the Tourmaster Select Lid Pack helmet bag I just leave my two most used shields in the bag – being careful how I fold and store the bag.

4) Sas-Tec VS. D3O

This is another one where people have written in quite a bit for further clarification. I suspect this is an indication of the level of confusing info out on the interwebz regarding the stat’s for both Sas-Tec and D3O. Here is the bottom line:

Some of the high end Sas-Tec armor (according to their own ratings) affords more protection than does the high end D3O armor (according to their own ratings.) The Sas-Tec Prestige SC-1/42 joint armor gear comes in at an impressive 6KN (the lower the number here the better.) It has a universal-fit design and it can be used for shoulder, knee and elbow. That’s nifty.  Their SC 2/07 hip protector is 9KN. The SC-1/06 knee is 11KN. The Back armor comes in 5 sizes and has prefixes that are either SC or SK (SK-1/55, SC-1/11, SC-1/12, SC-1/16, SC-1/13.) It bells in at 6 KiloNewtons of transmitted impact to the anvil. So, by my way of thinking I can get pretty good coverage with 3 sets of the Prestige SC-1/42 and one SC-1/16 back pad. Throw in the hip protector and I am done. The newest Scorpion textile gear comes from the factory with Sas-Tec Level one armor.

D3O’s Highest end gear is their Xergo (joint armor) and Viper Stealth Pro (back armor.) They ring in at 11-12 KiloNewtons (the lower the number the better.) I have to believe these numbers because they are done by independent labs contracted by the European Union and not done by the manufacturers of the gear themselves.  This is still within the range of the CE Level 2 cert’s. The newest Firstgear TPG line has their T5 EVO- Pro molecular armor installed from the factory – this is level two armor in all but hot weather where it just drops into the level one category..

I am ordering up some Sas-Tec armor to swap into the Joe Rocket suit (crossing my fingers that it will be a swap fit) as I seem to be riding a great deal with the Survivor these days. More on the fit and feel of that trade out when the armor comes in. I hope this finally makes sense of the numbers game with the molecular armor for those seeking the most highly rated gear.

5) A while back there were questions about heated gear. I will research this and order some up before the fall chill hits. Hang on for a heated gear report in a couple of months.

Please Keep the questions coming.

—–

Gerde Applethwaite

New For Fall 2013 – Icon Jackets and Gear

By Gerde Applethwaite

Shorter: The Moto gear manufacturers are starting to release their fall stuff and here is a look at some of the kit from Icon.

Icon Jackets:

Icon is always very good with the naming thing. It’s unrelentingly evocative of… something. They have an entire new line called “Overlord Resistance” (see what I mean.) The jacket has the look of tactical armor to reify the product name. The line runs from helmets to jackets to pants to gloves to boots. You can be Overlord resistant from head to toe.  Sometimes the creative enthusiasm of the folks in the ad department runs away with Icon but I have to giggle along with them under my breath. When you are deciding whether or not to buy this Icon gear you will have to interpret the practical meaning of terms from their marketing wizards like; “Attack Fit”, “Fighter Mesh” and “Tactical Front.” I want to work for them. I want to be a part of the team that sits around the Cheetoh-laden table and comes up with this stuff. It must be two and a half hoots. I could be “Gerde the Indomitable, Ruler of the CE-EN471 Dominion and Grand Panjandrum of the Viscoelastic Knights.” Yeah, that’s me – Indomitable wot’s it.” Where do I sign?

Once again, as I mention every 10 minutes, I am really only interested in full hi-viz gear for my personal riding kit but I am attempting to overcome my personal bias while I look toward the new offerings from the major gear makers.

Having said that let’s take a look at the Icon Overlord Resistance jacket with EN471 hi-viz accents. This jacket is complete with D3O armor all around. Yup (!) all around — the back armor too! Hallelujah. I wish they all had it. Thank you Icon! This D3O is only level 1 but the form factor should allow you to swap in the Level 2 D3O if you are interested in the high end molecular armor (for more about the differences in viscoelastic armor see my earlier post “Traversing the Molecular Maze.”)

This Overlord Resistance jacket is a sport-bike rider, waist-cut, design. The jacket has pre-curved arms so that you are not fighting with your jacket in order to get comfortable on the bike. The neck is your standard sport bike style crew neck. The hi-viz inserts are not enough for me but I am suppressing my urge to lecture about hi-viz. In this case I am just thankful they have a hi-viz offering at all. According to the Icon video for this jacket you will want to: “approach, engage and vanish” from The Overlord with this look. There are 4 other options including; a white with black accents, a solid black, a red with black accents and a wild looking thing that is blue with pink accents.  Yes, you can resist The Overlord in the pink and blue jacket. I am the Indomitable Wot’s It and I say so.  For more details about the construction and fit look to our Icon jackets pages.

Icon Citadel Mesh Jacket:  They come in; full black, black with hi-viz, black with red and grey with grey. There is, like the Overlord jacket, a removable thermal vest for those days when the weather starts to get a bit chilly. This is a mesh jacket so you get plenty of venting here – they call it “large hole Iron Weave Mesh” and the only thing that keeps me from the temptation to hyphenate every word is that the first two are not capitalized

Icon Overlord Pants: The Icon Overlord jacket zips to the Overlord Resistance pants and for some reason I am now conjuring up an image of Eddie Izzard on stage in Overlord Resistance pants. This too will pass. The pants are are equipped with D3O armor in the knees and its also level 1 D3O. Unusual for standard street fare is the inclusion of pucks in the knees. The armor is a molded puck but has something called Battlehide Leather and Fighter Mesh. Come on, tell me you don’t want to work for them too? The pants are black and have the standard back zipper to mate them with the jacket. These are not overpants.

Icon Insulated Denim Pant: Don’t want to wear leather or textile riding pants to your mother in law’s BBQ later in the month? Icon has a pair of Insulated Denim Pants that have a removable insulated liner, D30 armor and an Aramid fabric inner patch over the knee.  They look like your standard blue jeans but there is armor inside.

Icon Citadel Mesh Pant: These pants are the mate to the Citadel jacket. They hook and loop to the jacket. They are not overpants.

Icon Helmets: The helmet for the Overlord ensemble is an Icon Airframe Helmet in a matt black with a yellow visor. It is called the “Airframe Ghost Carbon.’ Yup, its a medium oval, carbon fibre version of the Airframe helmet and it weighs 1450 grams. The helmet has all of the standard cert’s. Not the least of which is the ECE 22.05.

The Icon Airmada Helmet line has not been ignored. You will find no less than 14 new graphic schemes to complicate your choice.

Icon Gloves: There are new gloves that are a part of both the Overlord Resistance and the Citadel Mesh packages. The Overlord Resistance Gloves are wrist length and the Citadel Waterproof Gloves are gauntlet style. The color schemes of the gloves are in tandem with those of the Icon jackets. I am more a fan of gauntlet gloves these days so let’s look at those.

The Icon Citadel Waterproof Glove has a Hipora liner to keep the water out. It has their Battlehide leather on the finger tips and to help prevent knuckle damage in a get off they use TPR that is bonded to the glove in this new welding process that we see on all of the fall gear. They are just under $100.00.

Icon Boots: The New boots are called “Field Armor 2 Boots.” They come in a grey and a black and are equipped with a steel shank, 2 buckle closure system and a Goodyear welt. Oh yeah, they are just above the ankle style boots.

Next up – What’s new from Alpinestars.

Gerde Applethwaite

Shoei Giveaway: Time to Pick Your Fav

Thank you to everyone who is participating in our Endless Summer Shoei Giveaway! The contest ends tonight at midnight.  If you haven’t entered yet, you can enter here.

We are excited about the grand prize: The choice of any Shoei helmet from the internal sunshield family!

The Shoei GT-Air, the Shoei Neotec and the Shoei J-Cruise are designed for different riding styles and each one provides an advantage depending on how and what you ride.

It may be an easy decision. Maybe you’ve always wanted to try the flexibility of a modular helmet so the Neotec would be an obvious choice. Or maybe you’re ready to upgrade the coverage and go full face. The GT-Air is one of our best full face helmets and has a streamlined aerodynamic design; if full-face helmets are your thing, you won’t be disappointed. Or if you want to freedom of less coverage, the J-Cruise might be the best style for you,

Let’s take a closer look at the features so you can make a more informed decision about which one you would add to your collection. It will be up to you to pick the best looking color on that model.

These three models round out Shoei’s “advanced integrated sunshield” family by providing a full face, open face and modular style all with the same state-of-the-art technology.  The integration of this sunshield was done without any compromise. They didn’t thin out the shell or the liner to accommodate the retractable shade. It’s perfectly seamless with the design of the helmet.

The built-in dark smoke visor provides instant relief from sun glare in one quick motion with an easy to reach switch. It’s operated with a steel cable which was built to withstand heavy use. This drop down visor is the only one on the market that meets the ANSI standard for non-prescription eyeglasses. It’s distortion-free & blocks 99% of harmful UV rays.

All these helmets were developed in Japan using Shoei’s in-house Wind Tunnel to maximize aerodynamic performance. They all use Shoei’s Advanced Integrated Matrix - a high performance fiberglass/ organic fiber blend that creates an ultra-lightweight, rigid and resilient shell structure. The ventilation system on these helmets is exceptional. The front and rear vents work together by scooping the fresh air in from the front and creating a vortex to move the air out of the back of the helmet for maximum cooling.  There’s also an exhaust port in the neck roll.

Each helmet uses the 3-D Max-Dry liner which is antibacterial and wicks 2 times more moisture than standard nylon liners on the market today. The foam cheek pads provide a secure fit, which means less road noise, and are eyeglass compatible. They also feature removable ear pockets to accommodate a communication system, if needed.

Now some specifics.

The chin bar of the Shoei Neotec is held in place with an easy-open lock release button. It feels solid, as do all of the moving parts. It truly has a full face feel when the chin bar is down. It feels very secure. The Neotec comes in all the Shoei solids: White, black, anthracite, light silver, wine red, and matte black. It also comes in one “hi-viz” accented graphic, the Borealis TC-3.

 

The shell of the full face GT-Air was sculpted specifically for the US market with a focus on aerodynamics, stability and ventilation. The GT-Air comes with a chin curtain, breath deflector, the CNS-1 pinlock ready shield AND includes a clear pinlock lens.  The base plates on the shield are self adjusting and draw in the gasket when the shield closes for a better seal than we’ve ever seen. The dual ridge, rubber beaded eyeport seal is exceptionally airtight. The GT-Air comes in Shoei’s solids but it’s also offered in 3 Journey graphics and 2 Wanderer designs. (We personally are drawn to the stunning good looks of the Shoei GT-Air Journey TC-2, but don’t let that influence you.)

The Shoei J-Cruise “leaves absolutely nothing to be desired,” according to one reviewer. He goes on the say:

“The aerodynamic design and thick padding deaden wind noise and make the inside this helmet far quieter that with any other helmet I have owned. The aerodynamic windscreen design really does redirect air down from the rider’s neck and also helps provide a quiet ride. The optically correct screen and sun shield really do seem to render a clearer picture of the surroundings. The sun screen mechanism is extremely smooth and the shade itself does not hit my eyeglasses which is a very annoying aspect of many built in sun screen helmets. Everything about this helmet says “quality”, from design to fit/finish to performance. It is the most expensive helmet I’ve ever owned and well worth the extra bucks. The J-Cruise comes in all the standard solid colors offered by Shoei: black, white, wine red , anthracite, brilliant yellow, matte black and matte deep grey.

That’s a very high recommendation from a serious long distance rider.

If you are torn, don’t hesitate to call us and discuss the features of these three models: 888-343-5638. We hope that even if you don’t win, you will consider adding one of these quality helmets to your collection.

Good luck and ride safe.

Scorpion EXO-900 Transformer – Rider’s Review

By Gerde Applethwaite

Shorter: The CE rated Scorpion EXO-900 is really a Swiss Army knife sort of helmet with a variety of features and plenty of versatility. The price seems more than reasonable to me too.

I took note of the Scorpion EXO-900 when it came out but I didn’t focus on it because I wasn’t interested in a modular unit. Now that I am an eyeglass wearer (see my previous post entitled Eyeglass Update) I have taken a closer look at the whole modular helmet scenario. I like the Scorpion because it is versatile, well thought out, CE rated and (absolutely mandatory for me) comes in a hi-viz flavor.

My head girth rings in at 60 cm.  This usually puts me right on the cusp of the medium and large dome sizes. Scorpion’s size chart steers me to the large. I popped it on and found, voila, the best fitting helmet I have ever had. The EXO-900 fits my head perfectly. I am what is known as a medium oval and this helmet feels as though it was custom crafted for my skull bone.

Ok, let’s start going through the features. The EXO-900 has a drop-down, fighter pilot, style of sunvisor. You work it with a modest push or pull on a left side lever and its easy with a gloved hand. The action is quick and smooth. When the visor drops down it pops gently off of your nose and then back up a little. Your nose may vary but for me it was just a gentle tap and then it was resting without contact. It retracts pretty easily too. The visor never got in the way of my eyeglasses. The visor is not polarized but it is dark enough to cut down on bright sunlight and its a neutral grey color. I would have preferred a nice brown lens but that’s me.

The whole modular unit hinges up and down by pulling outward on a red button on the chinbar. This too is easily done with a gloved hand. The chinbar moves up and rests on the top of the helmet. The motion is easy and sure. Scorpion goes you one better and once you have positioned the chinbar in the right place and pulled back on the 2 safety catches you can remove the chinbar unit in its entirety thereby leaving you with an open-faced helmet (with the drop-down sun visor.) That’s a neat trick. The mounting points are two bayonet style tabs in the chinbar. The tabs work in combination with the spring loaded safety catches that open up the receiving holes a bit so that you can insert the tabs. This whole operation is a bit tricky at first…and second … but by the fifth time I had it knocked. Please note that I have a bit of a hard time with shield swap outs and I have always found my Arai shields a bit of a test so I am clearly not the standard by which this process should be judged.

When you have finished removing the chinbar its time to install what Scorpion calls the “3/4 Peak Visor.” This is a plastic crescent that sits atop the upper ridge of the helmet’s face opening and snaps down along the sides of the face opening of the helmet. This makes the helmet look more like an open-faced helmet with a mini-bill, like the Shoei RJ Platinum-R. The Peak Visor uses the same bayonet and latch points that the chinbar utilizes. Once you suss the lineup, and with some practice, it also pops on and off pretty quickly. Make sure its all fully seated before you put the helmet on.

There are only two vents on the helmet and that makes sense – if you want more air take the chinbar off. Both vents open and close easily with a gloved hand: a top vent and a rear vent. I rode with the chinbar down and both vents open on a 78° day and it wasn’t stuffy inside the helmet.

The helmet has Scorpion’s air pump “Airfit” system that inflates segments of the padding around the lower part of your chin. There is a rubberized, red, circular button on the rear helmet padding: push the button – inflate the air bag. Press a small button next to the big button and release the air, hey presto. You do this with the helmet on your head and you stop when it feels right. The action on my test helmet was pretty minor so I took another Scorpion off the shelf to check it out. Apparently the inflated bag isn’t huge and the effects are subtle. I assume it will work to keep the helmet in place when you land and I can’t find any reason not to like it as long as it holds up. This is yet another clever idea from Scorpion. I have been an Arai person for years and years but I am starting to like these guys. I recently reviewed one of the Scorpion jackets and I liked the way that was put together too.

Having said that I must note that because the helmet is a modular it is necessarily heavier than my Arai. Because the Scorpion EXO-900 is a modular it is also noisier than my Arai full-face. I wear custom molded ear plugs and I also have tinnitus (life takes it tolls) so I may not be the most critical evaluator of wind noise. My testing equipment has been repeatedly and foolishly placed next to too many mega-concert speakers and has been hung out in the wind on too many unhelmeted motorcycle rides. Ahh, that’s all behind me now – sorry, what did you say?

I have two bikes, one has a moderate sized windscreen (bigger than a sport bike thumbnail but smaller than, say, a Vetter) and the other has no screen at all. The wind coming off of my screen at freeway speeds hit the helmet at an angle that seemed to catch under the ¾ Peak Visor and push my head back more than I am accustomed to. I am going to go for a ride without the chinbar and Peak Visor just to see what the wind does to the helmet on both bikes. The wind thing is tricky and you really have to match the helmet to your bike as well as to your head.

The padding material is wicking, removable and washable and feels like flannel pj’s. against your delicate skin. No, really.  As I said at the top the helmet’s interior fit me perfectly and yeah, way comfy.

The visor is billed as super strong and optically correct. From what I hear Scorpion has the visor thing down. It is also equipped with an anti-fog treatment called “EverClear” (no, not the same stuff) that they guarantee for a year. I have just gotten used to my Arai Pinlock system and fog is a thing of the past for me but riding around with EXO-900 I noticed no fogging either with the sun visor up or down. There is a chin curtain that snaps into place as well.

There are a variety of colors but quite frankly all I care about is hi-viz. They have it – I like it.

Oh – lest I forget, there are also external ports built into the helmet for a communication system. Just pop out the cover plates and install the comm.system. Scorpion does not make its own proprietary system but a host of manufacturer’s have designed adapter plates for this helmet. If you want a comm. system this should be a straightforward alteration.

All in all this is a dandy helmet and it is another of those products that I find to be well made and feature packed. Helmets keep getting better every year.  If you are already a modular wearer this one is a fine replacement and if you wear glasses this is a strong candidate for your next helmet.

Gerde Applethwaite

When To Rehelmet?

By Gerde Applethwaite

Shorter: How long should you hold onto that old helmet before you let it go?

My assignment this week was to write an honest blog piece about when it is the right time to ditch your helmet and re-up for a new one. There are some obvious answers and then there are some that seem not so much.

Before I started working on this post I had to bicycle over to the store to get some more apple juice. The ride took me onto a bridge over an estuary. I walk the bike over that bridge because I like the water. I find it enjoyable to stroll the bridge’s length and watch the world go by. There was a seagull flying slowly about 30 feet over the drink: it tilted one wing toward the water and the other straight up into the sky. In that moment she had dumped the air from her wings, lost most of her air speed, did one cartwheel and pitched straight down toward the water head first. in the descent she pulled her wings in about two thirds. When she was only a few feet off of the water she snapped her wings out full in a braking and gliding maneuver and then bobbed her head underwater to grab a small redish fish. With but two big flaps of her wings she avoided crashing into the drink and was back up in the air again. Its an astonishing feat of skill and grace to witness. There was a short stuttering motion as she flew off: she had just slid the small fish down her gullet. Done and done, the fish never knew what hit it.

One of the campfire rituals with riders is the exchange of harrowing accident or near accident stories. These stories run the gamut from hitting the headlight frozen deer on the back country road to being struck by some  #%@ing texting teen making a left turn. Most of the time riders say stuff like “he/it came out of nowhere.” These accidents happen so quickly and there is often no time to react. We’re not the bird – we’re the fish. If they were very lucky there were no, or minimal, injuries and the gear took the brunt of it. You may not need to get rid of your jacket or riding pants but if your helmet had an accident impact it has to go. No no – it has to go. The combination of stress fractures in the shell combined with compression of the inner EPS liner foam render the helmet useless for anything other than a planter* or a bird house. The liner is incapable of protecting you from impact injury after it has suffered one impact. There is a nice video shot at the Nolan factory that shows the helmet testing procedure and the most interesting part for me was the moment when they restruck a helmet and looked at the dent in the surface. After one impact the helmet loses its ability to adequately distribute the force of the blow over the surface of the helmet. It really brought home the idea that you cannot reuse your helmet after you have had an accident with it. Even a small impact is enough. Not a ding like dropping it off of the cocktail table or the seat of your bike but certainly when you have a get-off and strike your helmet. How small a get-off? Good lord man just get a new helmet! How much is your brain worth? Replacing your helmet after an accident is a pretty clear choice for most riders but the rest of it is not so clear.

You can find lots of advice from people who want to sell you a helmet (yeah – like us)  about when a helmet ages out. It becomes difficult to get the straight dope. The most widely accepted idea is that you replace your motorcycle helmet every 5 years. Why? Well uh… because it wears out, that’s why. Well, what wears out? The uhhh, EPS liner foam interacts with your sweat and that diminishes it structural reliability – yeah, that’s the ticket. Really? Can’t they make a liner that doesn’t interact with your body oils or sweat? Well, yes, in fact the whole thing is a canard. The liner isn’t affected by your sweat or scalp oils. Your helmet may stink but the EPS liner isn’t necessarily diminished.

Many of the helmet manufacturers will talk about liner degradation from body oils or sweat but this information is the subject of some serious question. There is a nice article by the Bicycle Helmet Safety Institute and among other things it addresses this issue. The bicycle helmet liner is made of the same EPS foam material that is used in motorcycle helmets.

Can your EPS liner be diminished by solvents or cleaning agents. Yes, it appears so. If five years isn’t the standard for degradation what is? There is no hard and fast rule here. Other sources are as generous as eight years. If you notice that your helmet seems to fit more loosely on your head than it used to it is more likely due to abrasion of the liner and/or reduction of the liner by cleaning agents and not because your head is shrinking. In either case its time for a new helmet.

Your helmet’s integrity is indeed reduced by the ultraviolet rays of sunlight. The helmet is plastic and plastic does not play well with UV.  How long does it take to render your helmet unsafe? It depends upon the materials as some of the composites resist UVA and UVB better than others. What are those composites? I do not have a danged clue. I have read that many manufacturers are putting UV inhibitors into their shell plastics to slow this decay. This reinforces the notion that your helmet has a use-by date regardless of its impact history.

Alright let’s sling some product.

Helmet quality gets better every year and the prices are remarkably low for a helmet that offers more than reasonable protection for your brain case. You can get a perfectly nice Scorpion EXO-400 for a mere $110.00. I like that helmet. Too much for you? You can get an HJC-5N Open Face (solid) for an astonishing $68.00.  A Bell Arrow (either solid or graphic) for one Benjamin. How about a an HJC CL-16 (solid), a workhorse of a helmet, for only $117.00. I don’t often go into sales pitch mode but the point I am truly trying to make here is that you do not have to spend a lot of money to be allowed the opportunity to convert your old helmet into a bird house.  Why risk a concussion or more serious damage for a mere hundred dollars?

Step up another hundred bucks or so and you can get higher quality shells, more comfortable wicking liners, more durable face shields or in some even drop down sun visors.

Look into the Shark S700 (solid) for $210.00 or the Nolan N-90 N-Comm (solid) for $220.00. They are both very good helmets. Lots of choices – one brain to protect.

I recently demo’d a Scorpion EXO-900 Transformer [ed. that review will be posted soon] helmet because after my last eye exam, came the mandate that I wear glasses when I drive/ride. Modular helmets have now become more interesting to me. I liked that helmet. It has an amazing assortment of bells and whistles and it is CE rated. It fit my head perfectly too. Switching to a modular for my next purchase is definitely in the cards. It makes the whole eyeglass thing so much easier.

For years I rode with Shoei helmets. I wore out two RF200′s and had no complaints about either those helmets or any later Shoei head buckets I wore. I respect the Shoei name because they held me in good stead for many years.  Shoei has my attention once again because of their modular Neotec and also their full-face GT Air. When its time for me to go helmet shopping again they are high on my list.

I currently ride with an Arai RX-Q. The RX-Q is a replacement for my then five year old Arai Corsair. I followed the five year rule. I might not have had to but I figured I needed to do what I could to protect what few brain cells I have left.

Helmet integrity is reduced by an impact, by ultraviolet radiation and by abrasion of the interior liner and/or the liner’s contact with some solvents or cleaning agents. The decision to replace your helmet is, so to speak, a no-brainer. The decision to replace due to insults other than impact are a bit less straightforward. I would err on the side of caution. Take a gander at our helmet offerings and take another look at your helmet. Yeah, sure you can replace your helmet because you want something matching your gas tank color and we’d be tickled sideways to have your money but more importantly if your helmet is compromised surrender it to the finches or the orchids and get a new one.

* There are some wild and wondrous planters made from old motorcycle helmets (they will lend your garden something of the je ne sais quoi magic of a hubcap farm) and a quick tour of the interwebz will provide many ideas for other substantial and neighbor confounding things to do with your old helmet. Don’t throw it away, re-appropriate it. ‘No Madge – I’m re-appropriating it.’

 

Gerde Applethwaite

 

Eyeglass Update

By Gerde Applethwaite

Shorter: I took a couple of helmets with me to the optician and wound up with conventional frames anyway.

This is just a quick note about my visit to the Costco opticians. They were great and really friendly. They didn’t giggle when I came in with the helmets, instead the woman who helped me was nonchalant and said that they get motorcyclists in there every once in awhile and they often bring helmets with them. Bring your helmet/s.

Bottom line for me is that I wound up with a rather conventional frame. I looked at the prices and I went with something inexpensive and traditional in shape because I know I am going to be rough on these frames and I’ll be back soon enough for a replacement. Why replace an expensive frame just to bang it up again? My approach to the selection process is utilitarian and not fashion oriented. Mind you, its not that I am not tempted by a vintage pair of rhinestone encrusted Auntie Mame sunglasses but that’s for the Playa and its just not the done thing under one’s helmet.

How do they fit into my helmets? I took my Arai RX-Q and I grabbed a Scorpion EXO-900 modular helmet too. The Modular is clearly easier to work with when it comes to getting glasses off and on. No question.

I have been wearing straight templed Smith sunglasses with my Arai RX-Q for some time but since I got myself set up with the Pinlock shields on the Arai RX-Q I haven’t worn sunglasses. The eyeglasses fit in the helmet more awkwardly than the sunglasses did because the ear end of the temple arm is curved (like a regular pair of glasses.) Its a snug fit and bending the glasses up and into that area between my head, my hair and the thick foam padding is a bit of a challenge.

On the other hand the modular helmet makes this task much easier. On the Scorpion EXO-900 I press the red button on the chin bar, flip up the front piece and I am now afforded much more room to wrangle the glasses onto my head. Its true what the eyeglass wearers say about flip-ups. This still mandates the dance of wedging the frame in beside the padding and my head but it is made all so much easier with the additional room afforded by the flip-up. I have never worn a modular helmet before but I could get used to this pretty quickly. I cannot envision riding with the modular unit in the open position but the combination of being able to pop it open when stopped and then quickly dealing with the glasses or talking to toll takers and gas station attendants makes a flip-up tempting. On the other hand if I wanted to ride with the helmet in open-face style I could because Scorpion has designed the EXO-900 Transformer helmet so that the entire modular front end can be removed (while it retains its CE rating.) My next post will be a rider’s review of the Scorpion EXO-900 Transformer.

There is a Shark modular helmet, the Evoline 3 ST, I want to look into because it too is rated CE 22.05. More about this helmet in the not too far distant future.

Get on out there.

Gerde Applethwaite

But what about the pants?

BigGuy82

OK … I’m not a big fan of wearing a motorcycle jacket, especially when the temperature is 90 degrees and the humidity has you feeling like you’re in a sauna.  I’m a big fan of T-shirts when it gets hot (I also like to show off my ink).  Remember, I’m a motorcycle “libertarian” … I think adults should evaluate a risk and make their own decision as to accepting that risk.  That said, there’s no arguing that a leather or Kevlar type jacket with armor in the right places can save you from some serious pain and disfigurement.  But, even though the first thing riders think of when considering these jackets is usually safety and/or looks, there is also a strong case to be made for comfort.

On a recent journey, I rode through rain and temperatures that ranged from the low 50’s in the Rockies to 105 in the Texas panhandle. For this trip, I selected a Tourmaster Intake Air Series 3 Jacket.  While there are a lot of brands to choose from out there, if you’re looking for comfort, you should ensure that whichever one you choose has similar features that will make your ride more comfortable.

This jacket has a mesh shell that is very well ventilated and that means it remains relatively cool on a hot day (when you’re moving).  When the temperature gets cool, you have a choice of two liners that can be inserted separately or in combination for maximum insulation.  The lightweight liner provides great wind resistance and is also rain resistant (not at the level of a quality rain suit, but it does keep you dry in light or moderate rain).  The lightweight padded liner provides insulation and when these two are used together, the jacket provides comfort at temperatures as low as 45 degrees (for me).  Stick a thermal T-shirt under it and your good to go down to about 40.  For hot desert weather in the 90’s or higher, you can wear the mesh outer jacket over a wet T-shirt to keep cool and hydrated.  This jacket provides the advantages of three different pieces of clothing resulting in less required storage room and lighter weight, both premium requirements for long road trips.  Both liners can be rolled up tightly and take up very little room.  During my trip, I actually wore the jacket in extremely high dessert heat and at 12,500 feet in the Rockies, where I went from the high 70’s in Ft. Collins, CO to the low 50’s at 12,500 feet in Rocky Mountain National Park and then back down, all in less than three hours. I was able to adjust my clothing for comfort in just a few minutes and then easily readjust as I descended.  Very convenient, very compact and far less expensive than multiple jackets.

For those of you who also value the protective aspect of outerwear more than me, this particular jacket offers construction of Armor Link, 600 Denier Carbolex and 1680 Denier ballistic polyester with CE approved armor at all the strategic locations.  Hell, I don’t have a clue what all that means, other than it offers you some great protection from impact and road rash.

Comfortable long trips on a motorcycle don’t take any luck at all … they take careful planning.  The correct choice of equipment is critical.  You must pack lightly, compactly and efficiently, meaning that everything you bring along should preferably have more than one use and leather doesn’t fit this description.  This premium jacket certainly fits the bill (all right … leather looks a little cooler, but even without the liner and with the vents open, it is still hot as hell on a warm day).

Pants are a whole other subject …