Tourmaster Centurion Suit Review

by Gerde Applethwaite

Shorter: I think the Tourmaster Centurion riding suit is a good deal for the price. The weather has turned seriously cold in many parts of the country and its time to take yet another look at a riding suit that won’t break your wallet.

There was a time in ancient history when I used to ride in a beat up ‘Wild One’ style leather jacket, 501′s and a pair of Chucks. On my head I sported a bruised silver Bell Custom 500 helmet when I wore a helmet at all. That was it, that was my total commitment to gear for many years – oh yeah and Serengeti Driver sunglasses. Ever have a bee smash itself into that space between your nose and the nose bridge on your glasses at 60 MPH? Very disconcerting. Riding gear has improved since then and my inclination has improved as well. I am, as you likely know by now, all about the ATGATT and the hi-viz. In my slowly expanding collection of riding gear there is a pile of Tourmaster/Cortech textile kit. I am not a big spender on gear: I just don’t have a Klim type budget. I have found over the years that I really get major bang for my buck with Tourmaster gear. I am often amazed at what they are able to crank out for their price point. My #2 go-to is Firstgear with Scorpion coming on strong.

The Tourmaster Centurion suit has been around for a while and I see it often on touring riders. It comes in just below $400.00 and for that price you get whizzbangs not seen in many of the pricier suits. The suit that I have been riding around in is the Joe Rocket Survivor suit. It is slightly less expensive than the Tourmaster and its a good suit. When I was shopping it out I thought about getting the Centurion suit but decided almost immediately against it because they do not have a hi-viz model. When Joe Rocket presented its semi-hi-viz version I jumped on it. If you are looking into suits and are not interested in hi-viz riding gear then the Centurion should be an option for you.

The shoulder, knee, and elbow armor is puck style with a cushioning layer on the wet-ware side and Tourmaster says it is CE rated. They say no more than that so it is safe to assume that this means it is Level 1 CE armor. It appears that the back armor is some version of the standard place-holder foam. The hip pads are also place-holder foam. Were I to buy this suit I would have to replace all of the armor with CE level 2 armor. That’s why its irrelevant to me whether or not the back armor is just a place-holder pad – it would have to go anyway. The armor in the newly released 2014 Firstgear TPG Expedition suit is CE Level 2 except for the back armor which is (disappointingly) Level 1. The Firstgear suit is also ALL molecular D30. You pay extra for that but I think this is the direction that all quality makers will be heading toward in the not too far distant future. The armor in the Centurion resides in Velcro’d pockets in the mesh breather layer. The mesh layer is gauzy consequently the armor has the tendency to float around. This is not good. Floating armor means you are playing roulette with fate and your bone surgeon while you are in mid-flight: maybe you’ll land on the armor … then again.

The Centurion has a thermal liner. This is as it should be. I think all suits should have a zip-out thermal liner. Some do not: The Expedition does not, in spite of the fact that it is over $150.00 costier. The Tourmaster offering also has a few other nifty features that please me. They have incorporated a rain hood under the collar (the Expedition has one too), it zips down into place once you curl it back up. I love the rain hood idea. If you have ever ridden in the rain and had the cold wetness slither down the back of your neck you will truly appreciate the foldup-rain-hood-in-the-collar. They have also designed a truly nifty (removable) rain and wind gator that comes across the neck. I haven’t seen this elsewhere as standard on factory gear. This is a great feature and it is so simple. Clearly aspects of this suit were designed by riders or by people who actually listened to riders. Go to any rally and talk to the gathered over the course of a weekend and you will get enough information to design the perfect riding suit. Some features of this suit seem to have been designed by riders – others not so much. Tourmaster has also incorporated a small zippered pocket on the left forearm sleeve. Inside is a key hook on a bit of elastic string. This is a great pocket for a small wad of bridge toll cash or change for parking meters, for my eye drops and even a key or two. If you attach a small day-glo disc to the key ring and leave it outside of the zippered closed pocket it will serve as a visual reminder not to leave your keys in the ignition when you go to the coffee shop. If you see the disc when you are off the bike then your keys are not back in the forearm pocket – where are my keys? It might also be possible to fit a moderately sized Li-on battery pack in there for a heated glove.

The zippers are sturdy YKK and the exposed areas are rubberized. The Captain Kangaroo pockets are fold over style with Velcro but are not zippered. They have an angled, zippered foldover pocket on the chest. That zipper is not rubberized. Pockets abound for those who are into that sort of thing. If you need to carry a tuna sandwich in one pocket and a set of 3/8′s drive metric sockets in another then you will have no trouble here. The main zipper runs from neck to the top of the right thigh. The leg zippers run from ankle to the top of the hip. I like this because its a nice long run and the suit is easy in and easy out but it does cause some bunching when you’re seated on the bike (combine this with the floating armor and you are fidgeting for just a bit to get yourself situated before you set off.) The big zippers have rain/wind flaps secured with Velcro to keep out the weather. The crotch area has a big rain gator and I cannot testify to its efficiency at keeping you and the rain from commingling. I don’t get to ride the review suits in the wet.

The sleeve cuffs do not have a zipper but a pie slice shaped expansion insert that cinches over with Velcro. Some folks like the velcro cuff closure better because they ride with their gloves tucked under the the sleeve and the zipper cuffs make that harder. I have gauntlet gloves and it only makes sense to me, aerodynamically, to ride with them out over the cuff. I like the zipper style better because it makes it easier to reach in and grab your sweatshirt to pull it down. That’s just me. The legs do not have an inner gator panel to protect against water infiltration. It is expected that a good tug on the Velcro cinch will be sufficient to keep the wind and rain from crawling up your boots.

The collar has the traditional soft flannel type lining – no complaints there. Tourmaster has also included a Velcro tab to allow you to secure the top front of the collar on one side to the shoulder when you are riding on a warm day with the zipper partially open. This suit comes in both black with black on black and the suit that I received which is grey with black on grey with a silvery material across the shoulders. The shoulder vents are nice when you are leaning forward on the bike and in combination with the rear shoulder vent you get plenty of airflow. Tourmaster has added a snap in the middle of the front shoulder vents to keep the vents pooched open on warm days. This is easily a 3 season suit but stretching it into a full time four season might not work. in really warm summer weather you might cook too much – especially in the black on black version. My Joe Rocket suit is black with black and some hi-viz panels and in warm weather with a t-shirt and jeans on underneath it gets a bit toasty out in the valley on those long, endless freeway stretches. The tarmac can be a cruel mistress in the summer. Underneath the waffle weave silvery stuff on the shoulders are some foam pads that may or may not help you in a get-off but at a minimum help to give you something of that je ne sais quoi Transformer elegance. The material is 600 denier throughout and as a bonus a doubled layer of 1680 denier material at the main potential impact points. They have done a very nice job with this: the knees are covered in this extra layer and the pattern is a sort of overlapping chevron. The silvery stuff on the shoulder is an additional impact layer too. From the elbows to the wrist on the outside is more of this extra layer. Kudos. The lower back has accordion “Carboflex” material to help with the stretch over to the handlebars. They have also put accordion material at the elbow and knee joints. I read online somewhere that one rider complained that the accordion pleated material was the source of leakage into the suit on a rainy day but I have seen no such complaints elsewhere. I cannot testify one way or the other. I don’t get a chance to torture test these review suits – only the gear I ultimately buy for myself. Tourmaster has included a long thin strip of heat resistant material on the right inner calf (some suits do not have any) but if your exhaust pipes and hot bits happen to be on the left, well … there you are. Finally, bringing up the rear is a layer of black durable material on the butt side to reduce wear through. You know some suits do not have an extra layer here – how is that possible? Do they talk to anyone who rides? These suits are being bought by people who commute to work every day or by folks who are long distance riders. Why wouldn’t you reinforce the sitzplatz area? Again Tourmaster has clearly paid attention to some of the practical details.

They have included the typical waist cinching Velcro to snug the suit into fit. There are also snap closures on the arms for adjustment. Oh, and they include a little bag of extra snaps for repairs down the road. That’s a thoughtful touch.

There is reflective material on this suit and in any of the suits I have reviewed no maker seems to offer enough of it to satisfy my standards. This is easy – the closer you get to a standard construction worker’s hi-viz vest reflective scheme the better. The Expedition suit and the Tourmaster suit seem to be fond of the blackout type of reflective material. Its a fashion choice and not a full tilt safety choice. Did they do a survey and find that touring riders blanched when seeing 2” wide stripes of highly reflective silver safety tape sewn into their clothing? I doubt it, so where does this come from? I think the fashion drones back in the main office have decided that lots of reflective material are not syley style. They take the subway to work or they park their cage in the company lot. They are clearly not riding around on motorcycles at night. The black reflective material is not as reflectively effective as the silvery stuff. Scorpion’s Passport suit uses silver type reflective stuff (not enough by any means) but it is sprayed (or silk-screened) on and I worry about its longevity – even though I must say this sprayed on stuff from them really catches the light. Joe Rocket’s Survivor suit utilizes a combination of sprayed on and sewn on reflective materials. They went with the silvery stuff and although there is far too little of it the stuff they used is highly reflective as well. Firstgear has an unyielding affection for the lesser reflective black material.

Remember this is a $400.00 suit. I have quibbles with every suit I review, some more than others, but I always try to balance price against features. Of the 4 suits available to me I have chosen the least expensive one among them as my preferred choice. Price should not be the main deciding factor when you shop for any gear. Really take a close look at features and the quality of construction and then look at price. Tourmaster and Cortech seem to consistently do a good job at this balancing act. This suit may seem a bit dated in terms of its armor, its leg and sleeve closures and the way in which the thermal liner is secured to the suit with Velcro on the legs but all in all I am impressed. Were it offered in a hi-viz version I might have jumped on it for my personal ride. I am eager to see what lessons Tourmaster takes from this suit and from the advancements in armor in recent years for the design of their next iteration Centurion suit. In the meantime If you are looking for a touring/commute suit at a reasonable price I wouldn’t hesitate to recommend this one

Gerde Applethwaite.

Other suit reviews:

Firstgear Expedition

Joe Rocker Survivor Suit

Firstgear TPG Expedition Suit – Up Close

By Gerde Applethwaite

Shorter: NFL games in the snow and freezing rain – yup, its time for another riding suit review. In my ongoing quest for the best touring/commute suit I got my hands on the 2014 version of Firstgear’s Expedition Suit. Here is what I found.

This iteration of the Firstgear TPG Expedition Riding Suit is not perfect but it certainly is one of the better choices out there. My notion of the right suit is a hybrid combination of the various suits we offer. If one of the manufacturers came to me (hah) and said “Gerde, please tell us what we should include in our suit for this season and what we should leave out” I would be tickled sideways. As it turns out no suit that I have run across so far is quite right – some more so than others.

I want a suit that is; hi-viz, is made of a quality textile cloth, has inner leg protection material against hot exhaust pipes and hot bike parts, has large (2” wide or more) patches of quality sewn-in reflective material across the back, sides and front, has rubberized YKK zippers in all areas where rain might infiltrate, a thermal inner suit that zips out, a fold-up rain hood under the collar, enough zippered venting that the suit can truly be used as a 4 season riding coverall, a gator section at the gut/crotch level that will really keep rainwater infiltration out, an interior gator at the cuff that cinches up against your boot to keep out the wind and water, a pullback loop at the top of the front zipper to keep the suit from flapping against your neck when you ride on warm days with the zip partially opened, Level 2 CE armor in ALL of the armor pockets (including the back), doubled material in the likely impact areas, full main zipper that extends from neck to knee, an accordion pleated stretch panel in the lower back, and more. These are the basics and comprise the bulk of my checklist when I get a suit for review. Its pretty simple, I look at the suit for fit and feel and I go through the checklist: some suits do much better than others. Another consideration for me is price. My budget isn’t very high but I still want a respectable suit.  As a suit approaches ‘stich prices it better have ‘stich-like features – otherwise what’s the point?

The Firstgear TPG Expedition Suit was initially and recently re-introduced into the market place at a price point that brought it entirely too close to a ‘stich offering. They have since whittled a chunk off of the price as I suspect they came to a better understanding of the market place and their place in the market. This now makes the suit worth a genuine look-see.

Let’s get out of the way the 4 things that I dislike the most about this suit and then I can stretch out and spend the rest of the time talking about what I like. Firstly, (and this is the most egregious thing by my way of thinking) there is no hi-viz offering. The only color available is your typical no-viz grey with grey on grey. I really don’t want any riding gear that is not hi-viz. My days of riding with no-viz or lo-viz gear are done. Many of you may not care about this and if that is the case then this suit is a candidate for you. Second, Firstgear has once again designed some riding clothing that skimps on the reflective materials. There are tiny, thin patches on this suit but they are absurdly small and they really seem like an afterthought. I don’t know why Firstgear continually has such a hard time with this – for the money you are paying on this suit you should expect wide reflective panels in the appropriate areas. Third, I will sing Firstgear’s praises down a couple of paragraphs or so when I talk about the armor in this suit because it comes stock out of the box with Level 2 CE D30 armor except in the back where it is only level 1. Again, for this money I would expect them to upgrade the back to level 2 as well. [For more about molecular armor see Gerde's earlier post entitled “Traversing the Molecular Armor Maze.”] Finally, I think a four season riding suit on the moderately pricey end of the spectrum should come stock with a zip-out thermal liner (My $360.00 Joe Rocket Survivor Suit has one and its also has hi-viz panels.)

Having said all this let’s move on to the stuff that makes this suit a reasonably good buy. I have a bunch of Firstgear gear and I respect their attention to detail for the most part. Firstgear has also always been in that middle ground when it comes to price. This suit is now priced out at $552.xx.

The main zipper runs on a slant from neck to the top of the right thigh. Ingress is not too difficult when you unzip the main and leg zippers and dance your way in. The normal cautions apply about wearing your boots when you try to get in – don’t do it. You really need to get into any suit wearing your socks and not your boots. This just keeps you from snagging stuff inside the suit. I tuck my pant’s cuffs into my socks first and then its easy going sliding into a suit. The zippers are your traditional, durable YKK type and are rubber coated where it counts. The leg zippers are really nice because they run the full length of the leg. The leg zippers also have an internal panel that runs the length: it is designed as yet another barrier to the wind and rain. The panel closes up with intermittent Velcro. The waist cinches to adjustment with the standard Velcro’d belt on each hip. Firstgear has not included an accordion stretch panel at the lower back.

There is plenty of venting on this suit. Its pretty clear that you can wear this suit in the warm summer weather too. If you are touring in a climate where there are big changes between daytime and evening temps this suit will not disappoint.  As mentioned above the suit does not come with a thermal liner, alas. So layer up.

Oddly, at the time of this post, there is no suit box in the sizing chart from Firstgear. Wha? I am 5’10” and 150 pounds (more since thanksgiving, thank you) and I threw myself upon the wisdom of the distributor to send me the right sized review suit. They sent me a large. My standard riding toggery is usually a t-shirt (or more depending upon weather), a pair of Duluth work pants and my Sidi On-Road Goretex boots. The large Expedition suit seems a little swimmy for me but when, for cold weather, I add: a sweat shirt, a vest and sweat pants I start to fill up the room inside the suit. I wish Firstgear would make our jobs over here a little easier by supplying a sizing chart for their suit – come on guys.

The suit is made of “Hypertex” (a proprietary name) nylon 420 denier material which is touted as waterproof and breathable. It is down from 600 denier in the previous model. I have to do some research on this because I would like to resist the simple-minded temptation to make this a numbers game: 600 is better than 420 denier because it is more. This topic is worthy of a separate post and I am surprised that I haven’t done one yet. The suit also has material on the sides of the legs just below the knee that resists heat burn and melting from hot bike parts. This is good and cannot be taken for granted anymore because some suit makers have foolishly left it out. I wish Firstgear had actually made it larger than they had but at least they have it.  Firstgear has included a very small note on the tags that warns you if you burn the suit its on you. Obviously they are thinking about it and covering their liability here but if so you’d think they would make the safety/heat panel longer. The suit material is not doubled in impact areas like the shoulders, elbows and knees – too bad. The suit fabric is bonded to a waterproof internal layer and this seems to be the way that everyone is going these day. The age of a separate waterproofing layer are being cut out as the industry figures that a single layer makes the suit more waterproof while simultaneously reducing bulk and weight. Of course there is an internal mesh layer to keep the bugs out when you are riding with the vents open.

The cuff end of the legs have an internal rain skirt that is cinched up with a snap and Velcro to give you a good seal against your boot. In addition the gator has an elasticized bottom that is coated on the inside with a few, thin, running beads of silicone. The exterior cuffs of the Expedition suit have a Velcro cinch to further help in snugging the pants leg up against your boot. You don’t ride with boots? Don’t be ridiculous – of course you do.

One of the things that I really like about this suit is that they do not go nuts with the Captain Kangaroo pockets. I don’t want to land on the stuff in my pockets if I have a get-off. I really just need room for some keys, some cash, a thin wallet (and/or passport), and my eye drops. There are, thankfully, no pockets on the legs and just 2 pockets on the chest. These pockets are closed with a velcro’d overflap and a waterproof zipper – they are plenty roomy enough. There is a safe pocket inside the main zipper on the left chest. This is generally where I keep stuff like ID, credit cards and emergency contact info. There is also a cell phone sized flap pocket on the deep inside of the suit on the right chest. I never use those.

The neck has a great rain hood that rolls up under the collar.  I really like those things – you can find one on the Tourmaster Centurion suit but not much elsewhere. It is superb at keeping the rain from crawling down the back of your neck in a downpour and its out of the way when you don’t need it. The centurion suit also has a nice addition that you don’t see elsewhere – a removable neck gator that bridges across the top of the neck line and acts as a wind/weather break. I wish more suits had them but I seem to be doing ok with my necklacava. The collar also has an elasticized loop that hooks onto a catch further back to open up the neck when you are riding in warm weather and to keep the collar from flapping. The interior neck line is the standard soft flannel-like material that your skin will really appreciate after four hours of riding.

Finally, the armor. Firstgear was an earl adopter of the molecular armor tech. They have jumped the game with this suit because ALL of the armor (except, sadly, the back armor) is CE-LEVEL 2 D30. This is great! Gear manufacturers are slowly heading in the right direction and at some point I speculate that all armor will be be CE-Level 2 as standard. It is a combination of consumer awareness and demand in tandem with economies of scale that will lower the wholesale prices of molecular armor. This in turn will insure the ready availability of decent armor in the gear made by reputable manufacturers. Firstgear is leading the way.  Having said this I would not hesitate to ditch the D30 level 1 armor in the back and replace it with a D30 level 2 slab.  The armor adjustment in riding gear can be a nuisance. If you do not get your armor lined up properly it does you little good when you find yourself on the descent side of your involuntary air borne launch. The Expedition suit has the armor in pouches with Velcro on the front side. They have slathered the inside of the suit with enough mating Velcro that you can really align the armor precisely where you need it. Another suit that I recently reviewed was pretty lazy about this and it was nigh on impossible to get the armor lined up on my knees. Kudos to Firstgear.

This a well made suit. It is not by any means my ideal suit but I live in hope. The price adjustments have made this a good buy and as I edit this on a Sunday morning I have the NFL games on in the background. Snow is coming down in a serious way on the field and there is no better time to write about a good riding suit.

If you have questions about the fit of this suit just call us up and we will get you into the right size.

Gerde Applethwaite

Joe Rocket Survivor Suit Review

By Gerde Applethwaite

There was a time when I used to regularly commute to work on a motorcycle. I had an old Honda 305 Scrambler that I now really wish I hadn’t sold.  A friend loaned me a surplus Air Force flight suit to wear. It was actually nice and comfy although not at all waterproof. The suit was a sort of shiny/dull satin bronze looking thing that made me look like a space alien version of the Pillsbury Doughboy. It was difficult to get in and out of and required (after doffing footwear) a series of ritual convulsive writhings on the floor. I took that as part of the morning regimen on a workday and, yes, getting the suit off at work was a bit attention-getting and the subject of a series of predictable jokes.

My budget does not extend to the world of the ‘Stitch. I looked at the Tourmaster Centurion offering and rejected it right away because they had no hi-viz color scheme. If you are not interested in hi-viz you should look at the Centurion.too. This season Joe Rocket came out with a new version of their Survivor Suit with (altogether too little – IMO) hi-viz accent panels. I ordered it up nonetheless. Herein my first impressions of the Joe Rocket Survivor Suit.

Firstly, let me briefly spew yet another version of my ongoing complaint about manufacturers and their tardy and hesitant adoption of hi-viz.  I am surprised that it is taking so long for all manufacturers to readily and fully embrace the hi-viz color option. Joe Rocket did so (partially) with this suit and for that I praise them but this suit has hi-viz  panels sort of thrown on as an afterthought. Manufacturers please take note: The purpose of hi-viz color and the Scotchlite type reflective panels is not that of a fashion design choice but a safety feature whose object is to alert the zombies on cell phones (for one) that I am here and would very much not like to be hit by you and your your 3000 pound steel cage. Joe Rocket has taken their earlier black suit and added the hi-viz panels onto the sides below the armpit and onto the shoulders. There is nothing on the back panel or the chest panel by way of hi-viz but they they did put in some really dandy reflective strips along both sides of the back, running vertically. Nicely done. This effectively means that you have a reasonably decent chance of being seen from behind by car headlights but during the day there is no hi-viz color back there and very little to the front  that will alert drivers.  Oh, there is also is a little patch over each knee. While these panels are helpful they are not nearly enough. As a rider you need to be seen fore and aft and side to side and this suit does not do enough to accommodate that. Alas. More Hi-viz and more Scotchlite please.

Materials and durability:  The main suit fabric is constructed from something that Joe rocket calls RockTex 600 and they have it trademarked. They also indicate that RockTex is waterproof. Is it nylon? Is it polyester? Is it 600 denier? I assume the “600” means 600 denier but i’m not sure. They have a treated canvas material on the inner part of the lower leg to help prevent exhaust systems from from melting your new suit. There is an accordion stretch panel on the lower back that makes that forward lean non-binding.

Getting in and out……..zipppppers:  The Survivor Suit has a long diagonal zipper that runs from one shoulder to the opposite hip. There are also long leg zippers that run up to mid-thigh. This is easily sufficient to allow you to get in and out of the suit while seated (no unseemly rolling around on the floor.)   The zippers are sturdy YKK zips and are plenty durable. I like YKK zips: the externally exposed zippers are of the rubber (rubber-like material) coated type. Very nice. The RockTex material extends over the zippers as a flap and serves as another layer of water resistance – that’s pretty standard too. The flaps are locked in place by snaps.

I am not too fond of the sleeve treatment. It is next to impossible to remove your arms from the suit without sucking ½ the thermal liner along with it. The liner is secured with TPR (Velcro-like) and it just pops right off as soon as you pull your arms back. Most other jackets have a loop and snap setup on the cuff that prevents this but not this suit. This suit has a snap and loop setup but its part way up the arm. The cuffs are zippered though and that’s good.

Armor:  I read a report recently while doing the research for my “Traversing the Molecular Armor Maze” post that focused, in part, on back injuries and the effectiveness of back armor for motorcycle riders.  It states that the majority of spinal injuries come from impacts that torque the shoulders, hip and/or neck. The body twists radically under impact and the spine is damaged. He argues that strong back armor while recommended for protection of the ribs and internal organs is not as effective as riders think it is for protecting their spines.  He recommends high level shoulder and hip armor.  This suit has the typical place holder, thin (not CE) foam pad for back armor and you can buy and insert your own armor as you see fit. All of the armor in the suit is “CE” rated, except the back, but like most manufacturers they do not tell you what grade of CE they are using. If you have to ask then you can assume it is level 1. I am a fan of armor and I like either the D3O or the Sas-Tec gear. This is my first Joe Rocket purchase so I have yet to figure out what type of molecular armor I might be able to fit into the suit. Joe Rocket does make an armor upgrade but they do not make a viscoelastic armor for their gear. Nor do they have their armor pockets fitted for D3O or Sas-Tec. I have to research this further: more later when I have this sorted. Shoulder, elbow and knee armor are CE rated so I assume this is level 1 kit. I am only interested in level 2 CE armor and will see if I can fit the D3O Xergo in there. They doubled up the suit material on the shoulders, elbows and knees.

Weather seal….waterproof and/or resistant.  On a ride last year I got to chatting with a woman who was wearing a ‘Stitch suit. I asked her what she thought about it and I discovered that while initially pleased she said she wouldn’t do it again. Her main complaint was that the suit was not waterproof and that for all of the money spent she fully expected it to keep her dry (I didn’t ask her whether or not she Nikwaxed it.)  I would expect the same for that money. The Joe Rocket suit is substantially less expensive than a ‘Stitch and while I would really like it to keep me completely dry I have limited expectations that it will do so. Online I have read a couple of reviews from folks who have ridden in the rain with their Survivor suits and claim complete non-wetness. Amazing. It remains to be seen. My suit has only just arrived and while I might have the neighbor kids turn a garden hose on me I just haven’t found the time. So, a waterproofing review will likely have to wait until our next rain storm. I assume though that I will have to go after the new suit with the Nikwax treatment if I want to make an effort at waterproofing.

I should say on their behalf that Joe Rocket has taped all of the seams and they use the rubber-like coated YKK zippers. The pockets have an inner pocket of some rubbery material and I have every expectation that the pockets are waterproof.

Pockets:  The Survivor Suit has 2 waterproof cargo pockets on the left thigh and one small waterproof chest pocket with a small zipper. The thigh pockets are reasonably easy to get into when you are on the bike.  Phone, wallet, passport and change can go in there. The external pockets have triple closures.  I generally do not put any hard items (cell phones) into my bike wear pockets because I don’t want to land on them. Inboard of the Big Air vent is a chest slash pocket.

Neck seal: The neck seal is comfy around its inner perimeter, with that soft material, mmmm.  I actually like the way that Tourmaster handles the neck closures on their Defender suits more than I like the Survivor set up. Tourmaster has a big flap, a gator, that you can swing out across your neck to block the elements from getting in. This is a great idea and obviates the need for a scarf or a neck-lacava on cool or wet days. With the Survivor suit you will need to do the standard neckerchief thing the way you do with most jackets. The closure is a snap and all the big snaps are rubber coated on the facing side. There is a nice little elastic band, a small loop that the tongue of the collar snap folds into in order to double it over out of your way when you are riding with the jacket at all unzipped which you will do often when you are using the Big Air vent.

Venting: More about the “Big Air” vent: it is the name for Joe Rocket’s proprietary venting system and on this suit. It consists of a zippered mesh panel right underneath the main zipper  in the front of the chest. Zip the main zipper down to your navel and (after you have snapped the weather flaps out of the way [pro-tip: try to do this with suit off if possible] then zip up the mesh panel underneath with the hi-viz colored zipper — you have the thing half done. Unzip the 2 slash vents on the back and Bob’s yer uncle, lots of air flow. The suit is mostly black and on a hot day it is going to absorb a lot of heat. So, this venting scheme is the thing that will give this suit 3-season (in some climes 4-season) service. I cannot comment yet about the suit’s ability to keep you warm in the cold weather because its nice and toasty outside these days.

Warmth and liners:  The liner is removable. It consists of a lightweight satiny quilted material. Don’t ride with the liner in on a warm day if you can help it. If you leave the liner out and zip open that Big ole Big Air vent in front and also zip open the 2 slash vents in the back then you will be pretty comfy despite the fact that the suit is black and absorbs the sun’s heat. The liner isn’t overly thick but it definitely makes thing toasty when you are in and zipped up.

Heat Shield matter on inner leg: The inner, lower leg heat shield is made of a type of canvas that is treated. It will keep you from burning through your RockTex but if you have a scrambler I would check the alignment before you fire up the bike and your pipes get hot.

Cleaning: When it is time to clean your suit just go with the Nikwax system. Clean it with the Nikwax cleaner and then re-waterproof (or water resist – I haven’t done it yet, just got it.

I am pleased with the Joe Rocket Survivor Suit and my quibbles are small ones. I am still more than a little surprised that they can make a suit this nice for this price.

Gerde Applethwaite.